Horizontal Decanter Discharge Centrifuges Decanter Centrifuges
Speed of Drum 3600r/min
Product description:
Decanter centrifuge is a mechanical equipment which utilize the
principle of centrifugal and sedimentation and can carry out
continual separate the suspend liquid with density difference. The
centrifuges which made by out factory can clarify, dehydrate and
classify the suspensions with 0.002-3 mm solid-phase particles and
thickness range at 0.5~40%. The product can be classify into two
type LW-counter-current and parallel-current base on its structure
feature. According to feed feature, product can be divide into LW
two-phase separator, LWS three-phase separator. It is suitable for
separating different feed under different process condition, and
widely use in pharmaceutical, food, chemical, light industry,
environmental protection industry etc…
Application:
Decanter centrifuge is most often used for clarification of liquid
containing high concentrations of solid, removing solids from
liquid. It is usually used in waste water and PVC sludge industry.
And also can be used in sunflower oil, palm oil and tea industry.
Product competitive advantage:
1, Helical pusher adopts the special antifriction method: sprinkle
hardness alloy or inlay hardness alloy anti-friction disk; anti
–corrosion stainless steel is employed for the material of the main
parts of drum, so that assure the durability and longer using
lifetime of the equipment.
2, According to the operating condition’s characteristics of
material, optimize the drum length-diameter raido, drum and
structure of drum taper parts.
3, According to the material thickness, flow change , the rotate
speed difference and tolerance can be adjusted.
4, The decanter occupied little area, easy to be assembly and
commissioning; the whole machine is operated hermetically, and has
a good production environment.
5, Adopt double frequency conversion control for main motor and
differentia auxiliary motor, so make stepless speed regulation come
true as well as enlarge the scope of application.
Product Specifications:
Model | Drum diameter mm | Draw Ratio L/D | Speed
of drum r/min | Factor of separation G | Spiral difference
rotate speed r/min | Inlet
capacity(m3/h) | Main/assist
motor (KW) |
LW250 | 250 | 3.73 | 4200 | 2467 | 2~31 | 1-7 | 11/4 |
LW350 | 350 | 4.4 | 3600 | 2540 | 5~25 | 5~18 | 22/5.5 |
LW450 | 450 | 4.4 | 3200 | 2580 | 5~25 | 5~25 | 30/11 |
