Juneng aging oil treatment tricanter continuous decanter centrifuge
1.Product Description
The three-phase separation decanter centrifuge is a fully enclosed,
fully automatic and continuous process for the treatment of aging
oil. This product has been successfully used in Daqing Oilfield and
Liaohe Oilfield.
The aging oil from the storage tank has a high viscosity due to a
long deposition time, so it must be heated and a demulsifier added
to reduce the viscosity. The aged oil enters the three-phase
decanter centrifuge through the pump, and the centrifuge rotates at
a high speed. Under the action of a large centrifugal force, the
solid (sludge) with high density settles on the drum wall. Two
liquid phases with different densities form concentric cylinders,
with the lighter liquid phase (oil) in the inner layer and the
heavier liquid phase (water) in the outer layer.
The thickness of different liquid rings can be adjusted by the
liquid adjusting plate. The sludge deposited on the drum wall is
conveyed by the screw conveyor to the cone end of the drum body,
and discharged from the discharge port. It can be transported to
the designated place by the conveyor belt. A trolley can also be
used to transport sludge. The separated oil is transported to the
storage tank through the oil discharge pipeline, and the separated
water is also discharged through the drainage pipeline.
2.Main technological parameters
1) Washing and dehydration of starch
2) Dehydration of soybean wheat proteins
3) Dehydration of fish meal and fish
4) Dehydration of brewers' grains
5) Purification of juice and dehydration of fruit fiber
6) Separation and purification of animal and vegetable oil
3.Advantages
1) Lower cake transportation costs due to very dry solids
2) Better recovery of nutrients due to very high separation
efficiency
3) Lower fresh water consumption compared to other processes
4) Continuous and fully automatic operation
5) 24 h operating reliability
6) Optimum wear protection
7) Energy saving design
8) Easy to operate
9) Easy to maintain
10) Simple assembly/dismantling
4.Main features
1) All parts coming into contact with the product are made of
stainless steel.
2) 3-phase AC motor for controlled torque starting via frequency
converter
3) Approximately 80 to 90 % of the oil is recovered.
4) Low personnel costs due to continuous and automatic operation.
5) Highest g-force for higher solids output
6) Adjustable bowl speed via VFD
7) Automatic adjustment of differential speed via VFD
8) Two motor drive
9) Belts for both primary motor and secondary motor
5.Company profile
Juneng Machinery (China) Co., Ltd in Nanjing
We are devoted to centrifuges and dryers, which could used in
various industries, such as environmantel protection, food
industry, chemical industry and pharmaceutic industry etc.
Product Name | Juneng Machinery Factory |
Separator | Jiangsu Juneng Machinery Co.,Ltd(South) |
Centrifuge | Juneng Machinery (China) Co.,Ltd(Nanjing) |
Filter | Jiangsu Juneng Machinery Co.,Ltd(North) |
Dryer | Juneng Machinery (China) Co.,Ltd(Nanjing) |
Pump | Jiangsu Juneng Machinery Co.,Ltd(South) |
Our company has a professional design team of horizontal
separators, which are researched and manufactured by professionals
from the analysis of urban sewage materials, kitchen waste and
gutter oil to the design, control and automation of machines.
Our team
Metallographic analysis
Dynamic balance detection
Certifications
Packing&Delivery
Packaging |
| 123 (L) * 456 (W) * 789 (D) |
| 1.2 T |
| The normal package is wooden box(Size: L*W*H). If export to
european countries,the wooden box will be fumigated.If container is
too tigher,we will use pe film for packing or pack it according to
customers special request. |
Delivery | By train or by sea |
