Automatic Centrifuge Oil Water Separator Piston Type Slag Removal
Centrifuge Oil Water Separator Advantages
1. Automatic piston type slag removal
2. Modular design
3. Automatic operation
Centrifuge Oil Water Separator description:
The marine separator is mainly used for cleaning up the moisture
and mechanical impurity in the fuel ( Light diesel oil, heavy
diesel oil, fuel oil) and lubricating oil of ships and diesel
engine, which is good to reduce the abrasion and prolong its
service-life. The heavy diesel oil is separated by separator can
replace the light diesel oil for using so that reduce the cost of
production greatly.
The design, manufacture and inspect are accord with GB/T5745-2002
<< Marine Disk Separator>>. Stable operation, the
vibration is much lower than the national standard value. All
materials are made of stainless steel, so effectively reduce the
corrosion of separation materials.
Centrifuge Oil Water Separator Application:
The marine separator is mainly used for cleaning up the moisture
and mechanical impurity in the fuel ( Light diesel oil, heavy
diesel oil, fuel oil) and lubricating oil of ships and diesel
engine
Centrifuge Oil Water Separator Specifications:
Model | Rated Treatment
capacity (L/h) | Inlet pressure (Mpa) | Outlet
pressure
(Mpa) | Suck Journey
of Sump Pump | Outlet pressure
of sump pump | Motor (KW) |
KYDH206SD-23 | 3200 | ≤0.05 | ≥0.2 | ≥4 | ≥0.2 | 5.5 |
Introduction of Company:
Juneng Group has set-up a 1st class in-house laboratory for
chemical composition analysis, metallographic analysis, spectrum
analysis, performance analysis, radiographic inspection, magnetism
inspection, ultra-sonic inspection and etc. This is to imply with
the latest advance instrumentations and rigorous working attitude
to ensure every part of product is stable and reliable.
